LotrakŪ HF550: Technical
Lotrak® Geotextiles are manufactured under a Quality Management Scheme in accordance with provisions of ISO 9001.
Tested, independently, in accordance with European Standards, Lotrak® geotextiles comply fully with all aspects of the CE Regulations and are marked accordingly.
Lotrak® geotextiles used in each application have varying characteristics that are key to their success. In order to summarise these characteristics, the European Standards Committee (CEN) has documented the required characteristics for geotextiles for each specific end use.
A separate European standard covers each application and stipulates the different functions, characteristics and test methods to be used. One standard, EN:13249, lists the mechanical and hydraulic properties important to the functions of Filtration, Separation and Reinforcement when used in the construction of roads and other trafficked areas.
Design Guides are available below, or for a copy and accompanying CD, please contact us.
| Document | Download |
|---|---|
| Data Sheet | download |
| LotrakŪ Design Calculator | download |
| Design Guide | download |
| Ride in All Weathers Guide | download |
| Tensile Strength (EN 10319) | Warp 22kN/m Weft 19kN/m |
| Elongation at maximum load (EN 10319) | Warp 28% Weft 20% |
| CBR Puncture Resistance (EN ISO 12236) | 2750N |
| Cone Drop Penetration (EN 918) | 14mm |
| Pore Size 90% finer than (EN ISO 12956) | 550 microns |
| Water Permeability (EN ISO 11058) | 75x10-3 m/sec |
| Mass per unit area | 140g/m2 |
